- Home
- ยป
- Our Products
- »
- OSAKA Paint Spray Guns
OSAKA Paint Spray Guns
Pressure Feed Spray Paint Gun W 71
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | OSAKA |
Type | Pressure Feed |
Model | W 71 |
Air Inlet | 1/4" BSP |
Material | Aluminuim Alloy |
Weight G | 450 gms |
Air Consumption | 145 L/Min |
Needle and Nozzle | Stainless Steel |
Standard Nozzle | 1.0 mm |
Fluid Output | 375 Ml/Min |
Operating Air Pressure | 3-4 Kgf/cm2 |
Pattern | 410 mm |
High performance Spray gun with high transfer efficiency of Paint.
Mainly suitable for Bigger Jobs & mass production painting work, Continuous spray painting work,
This Gun can rotate at any direction during painting, This gun is light weight, Fluid path is Stainless Steel, Air adjusting knob is built on gun itself.
Technical Specification :
Mould Release Round Spray Gun
Minimum Order Quantity: 1 Piece
Product Brochure
Model Name/Number | W3/Fz Duo |
Air Pressure | 1-2 Kgf/cm2 |
Maximum Fluid Outlet | 35 Ml/Min |
Weight Gram | 145 Grams |
Fluid Inlet | 6 mm |
Pattern Width | 1-4 Inches |
- High performance Die Coat Spray gun with high transfer efficiency. Used for spraying fine spray with minimum overspray bounce back.
- It has very small nozzle. Input of Air & Fluid both at from one place,for better accuracy.
- Continuous spraying can be achieved by feeding fluid materialy pressure feed container.
- This gun is light weight, Fluid path is Stainless Steel.
- Air Cap of Nozzle is having special arrangement for spraying Flat pattern.
Mould Release Spray Gun
Minimum Order Quantity: 1 Piece
Product Brochure
Nozzle Size | 0.3 /0.5 mm |
Maximum Fluid Outlet | 35 Ml/Min. |
Brand | Prona |
Operating Air Pressure | 1-2 Kgf/cm2 |
Rated Air Consumption | 60 L/Min. |
Pattern Width | 1-2 Inch |
High performance Mould Release Spray Gun with high transfer efficiency. Used for spraying fine spray with minimum overspray and bounce back
Features:
- It has very small nozzle.
- Input of Air & Fluid both at from one place for better accuracy.
- Continuous spraying can be achieved by feeding fluid material by pressure feed container.
- This gun is light weight, Fluid path is Stainless Steel.
Additional Information:
- Item Code: MRS-3
Osaka Pressure Feed Spray Gun W 106
Minimum Order Quantity: 1 Piece
Product Brochure
Type | Pressure Feed |
Model | W-106 |
Color | Black |
Air Inlet | 1/4" BSP. |
Weight G | 350 gms |
Operating Air Pressure | 2-4 Kgf/cm2 |
Fluid Output | 270 Ml/Min |
Air Consumption | 145 L/Min |
Pattern Width | 240 mm |
Paint Inlet | 1/4" BSP |
warranty | 1 year |
usage | Industrial |
Standard Nozzle | 1.0/1.5 mm |
High performance Spray gun with high transfer efficiency of Paint. Used in mass production painting work, Converised painting line, Continuous spray painting work, Gun can rotate at any direction during painting, This gun is light weight, Fluid path is Stainless Steel, Air adjusting knob is built on gun itself.
Features:
- Excellent maneuverability
- Supreme finish
- Flawless performance
Additional Information:
- Item Code: W-106
High Performance Gravity Spray Guns W 306
Minimum Order Quantity: 1 Piece
Product Brochure
Air Consumption | 5 to 6 cfm |
Nozzle Size | 1-1.5 mm |
Brand | OSAKA |
Cup Capacity | 600 ml |
Air Inlet | 1/4" |
Warranty | 1 year |
Air Pressure | 28-43 psi |
Body Material | Plastic |
Max. Pattern Width | 240 mm |
Item Weight | 350 gms |
Fluid Output | 270/160 Ml/Min |
High Performance Spray Painting Gun. Centre Gravity cup ensures operator balance for easy handling of gun during painting process
Most widely used in Painting industries due to Ergonomic balance of gun, Higher transfer efficiency, Light weight gun,Stainless Steel fluid path.
Features:
- Sturdy construction
- Operator convenience
- Dependable performance
W-206S Suction Feed Spray Gun
Minimum Order Quantity: 1 Piece
Machine Type | Suction Feed Type |
Brand | OSAKA |
Cup capacity | 100 ml |
Color | Grey |
Material | Stainless Steel |
Item Weight | 450 Gms |
Nozzle | 1.3 mm |
Air Consumption | 175 LPM |
Pattern Width | 440 mm |
Fluid Inlet | 3/8 " BSP |
Air Pressure | 3-5 Kgf/cm2 |
usage | Industrial |
Fluid Output | 350 ML |
Air Inlet | 1/4 " BSP |
SUCTION FEED SPRAY GUN
Model W 206S
This gun is having paint feeding cup from the bottom side of the gun.
Paint gets sucked due to venturi action of compressor air.
Centrally balanced suction feed cup enables painters to operate gun easily
from bottom side of the jobs without interruption of cup. Aluminium cup ensures
rigid handling during operation of painting.
Mini Air Compressor with Touch up Spray Gun TI 140
Minimum Order Quantity: 1 Piece
Horse Power | 0.25 HP |
Model Name/Number | TI 140 |
Maximum Pressure | 40 psi |
Weight | 3.6 Kg |
Discharge Pressure | 2 bar |
Voltage | 230 V , 50 Hz |
Nozzle Size | 0.8 mm |
Cup Capacity | 140 ml |
Frequency | 50 Hz |
Maximum Pattern | 125 mm |
Mini air compressor is widely used where less air consumption & pressure is required.
It is widely used for supply of air to --
Small Touch up work ( 1 Sq. mtr. Area)
Spray colours on cakes,
Art works,
Inflator air into car tyre,
Spraying water on flowers ,
Inflating toys & sports equipments.
Thermacole painting,
Pottery Painitng,
Teracotta Colouring.
It is handy & can be easily carried away. It operates on single phase power supply.
WORKING TIME 25 MINUTES.
THIN COLOURS ONLY.
NOT FOR WALL PAINTS.
Features:
- Handy , Light Weight
- Sturdy and compact
- Easy to operate
Additional Information:
- Delivery Time: 1 week
Pressure Feed Spray Gun W 206
Minimum Order Quantity: 1 Piece
Product Brochure
Type | Pressure Feed |
Nozzle Size | 1.3 mm |
Body Material | Stainless Steel |
Product Type | Pressure Feed |
Model Number | W-206 |
Air Inlet | 1/4" |
Air Pressure | 50-70 psi |
Max. Pattern Width | 300 mm |
Item Weight | 422 gms |
Fluid Output | 350 ML/min |
Paint Inlet | 3/8 "BSP |
as well as continuous painting lines. These are designed to enable rotation of gun at any direction
and have stainless steel fluid path. These feature an adjustment knob that is fitted on the gun.
Our clients can avail these at competitive rates.
Features:
- Uniform finish
- Easy to operate
- Light Weight
Additional Information:
- Item Code: W-206
W-106 Pressure Feed Spray Paint Gun
Minimum Order Quantity: 1 Piece
Product Brochure
Type | Pressure Feed |
Model Number | W-106 |
Air Pressure | 30-50 psi |
Item Weight | 350 gms |
Maximum Fluid Outlet | 270 Ml/Min. |
Air Inlet | 1/4" BSP |
Standard Nozzle | 1.0/1.5 mm |
Needle and Nozzle | Stainless Steel |
Pattern | 240 mm |
Operating Air Pressure | 2-4 Kgf/cm2 |
Features,
- High performance Spray gun with high transfer efficiency of Paint.
- Used in mass production painting work,
- Conveyorised painting line,
- Continuous spray painting work,
- Gun can rotate at any direction during painting,
This gun is light weight, Fluid path is Stainless Steel, Air adjusting knob is built on gun itself.
W-77 Pressure Feed Spray Paint Gun
Minimum Order Quantity: 1 Piece
Product Brochure
Air Consumption | 16 cfm |
Nozzle Size | 1.0 mm |
Air Pressure | 98 psi |
Item Weight | 550 Grams |
Model Number | W-77 |
Maximum Fluid Outlet | 430 ml/min |
Max. Pattern Width | 445 mm |
- This is high performance pressure feed spray gun.
- The main suitable application purpose of this gun is bigger jobs, mass production painting work and continuous spray painting work.
- This gun is made up off stainless steel material with air adjusting knob and light weight structure.
Dual Head Spray Gun
Minimum Order Quantity: 1 Piece
Product Brochure
Air Consumption | 5 to 6 cfm |
Nozzle Size | 0.6/ 1.00 mm |
Cup capacity | 700 ml |
Warranty | 3 months |
Air Pressure | 28-43 psi |
Body Material | Stainless Steel |
Maximum Air Pressure | 2-3 KGF/CM2 |
Air Input | 6 mm |
Nozzle | Stainless Steel |
Features :
- Dual Head Nozzle Spray Gun is Mainly used wherein two fluids/ paints are to be sprayed separately.
- Two component paint or fluid are stored in independant Suction feed Pot or pressure feed container.
- From where they mixed after tip of Nozzle at around 6 inches distance from nozzle.
These system are mainly used in.
- Two colour Sprayint.
- Nano Colour Coating,plating/
- Laser colouring.
- High Precision Electronic components.
- Two Component system.
- Low viscose material can be easily sprayed in this system.
Applications:
- Handicraft surface plating.
- Mobile phone shell plating.
- Jewelry surface spraying
- Heel surface coating, etc.
K-3 Side Cup Touch Up Spray Gun
Minimum Order Quantity: 1 Piece
Product Brochure
Nozzle Size | 0.6 mm |
Brand | Osaka |
Model Number | K-3 |
Cup Capacity | 100 ml |
Usage/Application | Touch up & Fine Sparying |
Warranty | 1 year |
Air Inlet | 1/4" |
Body Material | Aluminium |
Air Consumption Of Rated Pressure | 30 LPM |
Required Pressure | 1-2 Kgf/cm2 |
Item Weight | 160 Grams |
These are extensively used for small spray patterns and are gravity feed spray guns. and reduce atmospheric over-spraying to maintain cleanliness in working area.These have wide ranging applications in touch up, scratch removing, marking, stenciling, small spray width painting and hobby work.
Features:
Wide range of applications
Sturdy construction
Side Cup
Mini Touch Up Spray Gun NA 2003
Minimum Order Quantity: 1 Piece
Product Brochure
Nozzle Size | 0.8 mm |
Cup Capacity | 140 ml |
Air Inlet | 1/4" |
Air Pressure | 1-3 Kgf/cm2 |
Body Material | Stainless Steel |
Max. Pattern Width | 125 mm |
Fluid Output | 120 Ml/Min |
These are extensively used for small spray patterns and are gravity feed spray guns. and reduce atmospheric over-spraying to maintain cleanliness in working area. These have wide ranging applications in touch up, scratch removing, marking, stenciling, small spray width painting and hobby work.
Features:
- Wide range of applications
- Sturdy construction
- Ergonomic design
Spray Gun Gravity
Minimum Order Quantity: 1 Piece
Product Brochure
Air Consumption | 5 to 7.5 cfm |
Nozzle Size | 1.4, 1.7 and 2.0 mm |
Brand | OSAKA |
Cup Capacity | 600 ml |
Air Inlet | 1/4" |
Warranty | 1 year |
Air Pressure | 30-50 psi |
Body Material | Stainless Steel |
Fluid Output | 250,375 and 500 ML/Min |
Open Air Press | 4-6 Kgf/cm2 |
Pattern Width | 300 mm |
Features:
- Ease of operation
- Stability
- Fine output
Bottom Cup Spray Painting Gun
Minimum Order Quantity: 1 Piece
Product Brochure
Cup Capacity | 500 ml |
Nozzle Size | 1 mm |
Type | Spray Gun |
Handle Material | Plastic |
Usage/Application | Spraying |
Pump Type | Double Pump |
office & store good purpose - manual osaka disinfection chemical sprayer
disinfection sanitizer sprayer manual to be sprayed on boxes, goods, raw material. .
description
in this system, water based sanitizer chemical is sprayed with the help siphon spray gun. Bottom 500 ml cup will be having material which will be sprayed through mini air compressor. Equipment is self operating. Compressor will have small tank. It is having
auto on/off system. It is light weight and handy to move from one place to other cabin. .
technical specification :
1. Model : osaka w 106
2. Type : pneumatic
3. Max pressure : 2-3 00 kgf/cm.
4. Bottom cup cap. : 500 ml
5. Power supply : 230 volts, 50 hz. Single phase.
6. Nozzle size inches.
W-106S Suction Cup Feed Spray Gun
Minimum Order Quantity: 1 Piece
Type | Suction Feed Type |
Model Name/Number | W-106S |
Brand | Osaka |
Cup capacity | 550 ml |
Color | Grey |
Air Inlet | 1/4 " BSP. |
Material | Stainless Steel |
Weight G | 350 Gms |
Nozzle Size | 1.0 /1.3 / 1.5 mm |
usage | Industrial |
Air Pressure | 2-4 Kgf/cm2 |
Suction Cup | Aluminium |
Air Consumption | 115 LPM |
Fluid Output | 270 ml |
Pattern Width | 310 mm |
Features :
- This gun is having paint feeding cup from the bottom side of the gun.
- Paint gets sucked due to venturi action of compressor air.
- Centrally balanced suction feed cup enables painters to operate gun easily from bottom side of the jobs without interruption of cup.
- Aluminium cup ensures rigid handling during operation of painting.
Dual Nozzle Spray Gun
Minimum Order Quantity: 1 Piece
Product Brochure
Type | Suction/ Pressure Feed |
Air Pressure | 2-4 Kgf/cm2 |
Air Inlet | 1/4" |
are to be sprayed separately.
Two component paint or fluid are stored in independant Suction feed
Pot or pressure feed container. From where they mixed after tip of Nozzle
at around 6 inches distance from nozzle.
These system are mainly used in.
1. Two colour Sprayint.
2. Nano Colour Coating,plating/
3. Laser colouring.
4. High Precision Electronic components.
5. Two Component system.
Low viscose material can be easily sprayed in this system.
APPLICATIONS :
1.Handicraft surface plating.
2.Mobile phone shell plating.
3.Jewelry surface spraying
4.Heel surface coating, etc.